Dassett Process Engineering Ltd. offers a wide variety of injection moulding machines suited to every customers needs. Known as the DM range of machines, they span from 40 ton right up to 170 ton machines.
 |
The design of the DM range of horizontal injection moulding machines brings a new dimension to the market place. |
|
|
The fully hydraulics lock machines with single cylinder locking apply the locking force centrally to platens and gives the tonnage the correct position. This combined with all steel platens ensure that tool deflection is reduced to an absolute minimum. |
|
|
The injection unit features
ten stages of fill speed and five stages of pack and hold to ensure
maximum control of the injection operation. |
Control
|
|
The machines are controlled be a central microprocessor and all communication is by means of the screen and keypad. |
|
|
All values
are set on the screen as there are no manual switches |
|
|
The screens
are user friendly and easy to access to enable the |
|
|
The machine
can store tool settings within the processor and this |
|
|
Closed loop process control is a standard feature and this enables very high repeatability of the moulding parameters and a very constant product to be achieved on the machine. |
|
|
All error messages are in clear text and easily identifiable. |
Hydraulics
|
|
Every effort has been made to supply the most balanced hydraulic system to give greater flexibility with lower power consumption using the very latest in proportional valve control technology. |
|
|
The hydraulic pump is a Vickers Intravane pump driving via a proportional pressure/flow block fixed direct to the pump. This reduces pipework, noise levels and reduces the amount of oil in the system. |